Synth300 Frequency Synthesizer Technical Specifications

 

Synth300 Frequency Synthesizer Press Kit             

Real oscilloscope waveforms: Synth300 (30 second) video demonstration.

Synth300 is a single or dual-channel Direct Digital Synthesizers (DDS) PCI card bus with one or two independent DDS, each separately programmable for frequencies between 1MHz and 300MHz in increments of ~0.223 Hz.  Frequency accuracy  +/-0.01% of specified frequency +/-0.223Hz.  SYNTH300  generates a single tone, two tones, sweeps a range of frequencies and phase shifts.  The generated signals may be modulated by switching between 4 frequency phase profiles associated with each simulator.  Specify frequency and phase for each of the 4 profiles.

Input/output

Direct Digital Synthesizer Outputs

Synth300S one programmable channel
Synth300D two independently programmable channels,

Analog output voltage (into 50 ohms):

500mV RMS +/-10% from 2-200MHz
500mV RMS +/-20% from 1-300MHz

Output impedance

50 ohms || 10pF

Output connectors

Two SMA connectors

Trigger/modulation inputs A & B

2 each TTL (V0l < 0.8V, Vih > 2.4V)
Two SMA connectors

Software programmable outputs

8 each TTL (V0l < 0.8V, Vih > 2.4V)
8mA max output drive

Bandwidth

 

Wideband SFDR
(DC to Nyquist)

Narrowband
SFDR +/- 1 MHz

Narrowband
SFDR +/- 50 KHz

40MHz Fout

60 dBc

87 dBc

88 dBc

100MHz Fout

54 dBc

82 dBc

86 dBc

180MHz Fout

53 dBc

84 dBc

85 dBc

Output Phase Noise (103MHz Iout)

@100kHz Offset

-152 dBc/Hz

@ 1kHz Offset

-147 dBc/Hz

@ 10kHz Offset

-150 dBc/Hz

Operating characteristics

Frequency accuracy 

+/-0.01% of specified frequency +/-0.223Hz

Operating Temperature Range

0 to +55 Degrees Celsius

Storage Temperature Range

-25 to +85 Degrees Celsius

Power Requirements SYNTH300D

+5V +/-5% at 0.3A Maximum
+3.3V +/-5% at 1.5A Maximum

Power Requirements SYNTH300S

+5V +/-5% at 0.3A Maximum
+3.3V +/-5% at 1.0A Maximum

 SYNTH300 boards are half size 32-bit PCI bus boards, which will operate in either 64-bit or 32-bit 33MHz or 66MHz PCI slots with either 5V or 3.3V signaling environment. To avoid overheating, all SYNTH300 boards must be installed a in well-cooled workstation, PC or server chassis.

 

 Synth300 Frequency Synthesizer Press Kit             

Real oscilloscope waveforms: Synth300 (30 second) video demonstration.

Synth300 Manual version 1.0  

                   

 

Price

Synth300S Single Synthesizer $1495 quantity 1

Synth300D Dual Synthesizer $1995 quantity 1

For quantities 2 to 10 there is a 10% discount.

 

Purchase  Synth300 now.

 

Home     Copyright     Privacy     Legal Notice     Employment